Stihl Cutquik TS 700 Manual De Instrucciones página 18

Cut-off machines are designed for use
with abrasive wheels in good condition
only. Machines designed for use with
wood-cutting or other toothed blades
use different types of guarding systems
which provide the protection necessary
for those types of blades. Machines,
such as a cut-off machine, which are
designed for use with abrasive wheels,
require a different guarding system
which is not designed to provide
protection against all dangers presented
by circular saw blades, carbide-tipped
blades, rescue blades or wood-cutting or
toothed blades of any nature.
TS 700
!
Warning!
To reduce the risk of injury from reactive
forces and/or loss of control :
1. Hold the cut-off machine firmly with
both hands.
2. Maintain good balance and footing
at all times. Never cut while
standing on a ladder.
3. Position the cut-off machine in such
a way that your body is clear of the
cutting attachment. Avoid standing
in direct line with the wheel. Never
bent over the cutting attachment,
especially when the guard is pulled
back towards the top and there is a
risk of reactive forces.
English / USA
4. Do not cut above shoulder height.
5. Do not cut wood or any other
material for which the abrasive
wheel is not authorized.
6. Never use circular saw blades,
carbide-tipped blades, rescue
blades, wood-cutting blades or
toothed blades of any nature. Their
use increases the risk of injury from
reactive forces, blade contact and
thrown tips.
17