Stihl Cutquik TS 700 Manual De Instrucciones página 6

– Most STIHL cut-off machine models
are available with an anti-vibration
("AV") system designed to reduce
the transmission of vibrations
created by the engine to the
operator's hands. An AV system is
recommended for those persons
using cut-off machines on a regular
or sustained basis.
– Wear gloves and keep your hands
warm.
– Keep the AV system well
maintained. A cut-off machine with
loose components or with damaged
or worn AV buffers will tend to have
higher vibration levels.
– Maintain a firm grip at all times, but
do not squeeze the handles with
constant, excessive pressure. Take
frequent breaks.
All the above-mentioned precautions do
not guarantee that you will not sustain
whitefinger disease or carpal tunnel
syndrome. Therefore, continual and
regular users should monitor closely the
condition of their hands and fingers. If
any of the above symptoms appear,
seek medical advice immediately.
TS 700
!
Warning!
The ignition system of your unit
produces an electromagnetic field of a
very low intensity. This field may
interfere with some pacemakers. To
reduce the risk of serious or fatal injury,
persons with a pacemaker should
consult their physician and the
pacemaker manufacturer before
operating this tool.
Proper Clothing
!
Warning!
To reduce the risk of
injury, the operator should
wear proper protective
apparel.
Clothing must be sturdy and snug-fitting,
but allow complete freedom of
movement. Avoid loose-fitting jackets,
scarfs, neckties, jewelry, flared or cuffed
pants, unconfined long hair or anything
that could become caught on any
obstacles or moving parts of the unit.
Wear overalls or long pants to protect
your legs. Do not wear shorts.
English / USA
!
Warning!
When cutting metal, a cut-off machine
generates sparks which can ignite
clothing. Most fabrics used in clothing
are flammable - even flame-retardant
fabrics will ignite at higher temperatures.
To reduce the risk of burn injury STIHL
recommends wearing clothing made of
leather, wool, flame-retardant-treated
cotton or a tightly woven, heavier cotton
such as denim. Some flame-retardant
synthetic fabrics are also suitable but
others such as polyester, nylon, rayon
and acetate can melt during fire into a
tar-like matter that burns into the skin.
Check the clothing manufacturer's
instructions. Keep clothing free of oil,
fuel, grease and other flammable
substances.
Protect your hands with
gloves when handling the
cut-off machine. Heavy-
duty, nonslip gloves
improve your grip and
help to protect your
hands.
5