Main Body - Kyocera KM-4230 Manual De Instrucciones

(1) Main body

1 Platen
(Set a book original or the like that cannot be set in the DF
on this.)
2 Original size indicator lines
(Be sure to align the original with these when setting the
original on the platen.)
3 Operation panel
(Operate to copy here.)
4 Stack bypass tray
(Load paper here when copying onto small-size paper or
colored paper.)
5 Insert guides
(Be sure to match the paper size when loading paper on the
stack bypass tray.)
6 Support guide
(Pull out when copying onto paper measuring 8
larger.)
7 Front cover
(Open to replace a toner cartridge or for misfeed removal.)
8 Right cover
(Open when paper misfeed occurs in the paper feed
section.)
9 Duplex unit
0 Re-feeding section
(Open when paper misfeed occurs in the duplex unit.)
! Duplex cover
(Open when paper misfeed occurs in the duplex unit.)
@ Drawer 1
(Holds up to 550 sheets of standard paper.)
# Length adjustment lever
$ Width adjustment lever
% Drawer 2
(Holds up to 550 sheets of standard paper.)
^ DF original reversing cover
(Open when paper misfeeds in DF section.)
& Original set indicator
(The original condition is displayed.
Green lights: The original is set. Copying will begin by
pressing the Start key.
Green blinks: The original is not set securely. Reset the
original.
Red blinks: Originals are misfed. Remove all misfed originals
in accordance with page 187.)
* Original insertion guide
(Set to match the size of the original when setting in the DF.)
( Original table
(Set the DF original on this table.)
) DF opening/closing lever
(Hold when opening and closing the DF.)
⁄ Original ejection cover
(The copied originals are stored here.)
¤ Paper ejection guide
(Open when setting an original of 8
DF.)
‹ Main switch
(Turn ON ( ) before starting machine.)
› Left cover
(Open when paper misfeed occurs in the fixing unit or
ejection section.)
fi Copy tray <optional>
(Completed copies will be ejected here.)
fl Toner cartridge
‡ Toner cartridge release lever
(Operate when replace a toner cartridge.)
° Paper transfer section release button
· Paper transfer section handle
" x 11" or
1/2
" x 14" or larger in the
1/2
‚ Paper transfer section release lever
(Operate when paper misfeed occurs in the paper transfer
section.)
ΠPaper feed section knob
(Operate to remove paper misfed in paper feed section.)
„ Fixing unit
´ Fixing unit handle
(Pull out the fixing unit to remove paper misfed in fixing unit
by handling this.)
‰ Fixing knob
(Operate to remove paper misfed in fixing unit.)
ˇ Fixing unit release lever
(Operate to open/close fixing unit.)
Á Handles for transport
(Pull out to be handle. They are located in four positions.)
<In case of using drawer-type paper feed desk>
¨ Drawer 3
(Holds up to 550 sheets of standard paper.)
ˆ Drawer 4
(Holds up to 550 sheets of standard paper.)
Ø Desk right cover
(Open when paper misfeed occurs.)
<In case of using deck-type paper feed desk>
∏ Paper feed deck
(Holds up to 3,000 sheets of standard paper.)
Å Right deck cover
(Open when paper misfeed occurs.)
20