ManuFaCturer
aGIP
ESSo
FIna
SHEll
aPI
CAUTION
Any top-ups or fluid changes using fluid of qualities different from those indicated
may reduce the machine's lifetime and impair its performance.
WARNING
Any operation intended to modify the setting value of the relief valves or pressure limiter
is forbidden.
The manufacturer declines all liability for damage resulting from tampering with these valves.
INFORMATION ABOUT DEMOLITION
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts.
And dispose of them separately in accordance with current provisions as prescribed by law.
INFORMATION ON REPLACING
AND DISPOSING OF
BATTERIES
Housed below the plastic cover underneath the ma-
nipulator console are 6 rechargeable 1.2 Volt 2600
mAh Ni-Mh AA penlight batteries connected in series
in a battery holder.
These batteries are very easy to replace.
- Undo the 4 outer screws on the underside of the
plastic cover beneath the manipulator console to
remove the battery compartment cover (Fig. 47a).
- The battery holder, carrying the 6 penlight batter-
ies, is situated inside the compartment, encased
between two protective shells (Fig. 47b).
- Remove the batteries and replace, if necessary,
observing the correct polarity.
- E
- Operator's manual
nGlISH
type oF oil
oSo 32
nUto H32
HYDRan 32
tEllUS t oIl 32
CIS 32
aRnICa 68
InVaRol EP 68
IDRan HV 68
tEllUS t oIl 68
HS 68
47b
47a
89