Data Detection Mode; Selecting The Type Of Vehicle - John Bean B 800 Manual Del Operador

A
B
C
56
4-5
5-13
4
3
2
1
4-6
Operation

5.6 Data detection mode

5.6.1 Selections by the User
For adequate rounded results and for a correct
application of thresholds, select, before the measuring
run:
— the operating mode (A, B, C, Fig. 4-5).
— The Type of Vehicle before the measuring run. (Fig.
4-6)
5.6.2

Selecting the Type of Vehicle

— In HOME SCREEN page (Fig. 5-13). Select the
TYPE of VEHICLE Item according to the rim. (Fig.
4-6)
When the selection has been made, the Type of
Vehicle in use identifi cation icon will be displayed in
the Information Field.
Fig. 4-6: Assignation of Types of Vehicle Items:
1 Standard vehicle wheel (car)- nominal dimensions in
inches. The measuring unit (inches) is displayed.
Normal and Alu 1 to Alu 5 weight positioning can
be selected.
Note: When operating on standard Vehicle wheels
with nominal dimensions in millimetres (e.g. TD
or TRX wheels), once the RIM DATA ENTRY
screen has been displayed, press on the rim
Diameter or Width values to change the
measuring unit to millimetres.
2 SUV vehicle wheel - nominal dimensions in inches.
The threshold value for suppression of minor
unbalances is automatically doubled when this type
is chosen.
3 Light industry vehicle wheel (Van) - nominal
dimensions in inches. The threshold value for
suppression of minor unbalances is automatically
doubled when this type is chosen.
4 M o t o r c y c l e w h e e l - n o m i n a l d i m e n s i o n s
in inches, with imbalances resolved and
suppressed in the same way as car wheels.
(Selection available only in Manual Mode).
........