Nilfisk Liberty SC50 Instrucciones De Uso página 17

INFORMATION MENU DISPLAY – CONTINUED
Menu visible only with yellow (Supervisor) SmartKey.
Menu Level
1 2
Options
User
Delete ALL PLANS?
Delete ALL TAGS?
Ignore water meter?
OvrCurProt. Enabled?
Impact Action
Impact Level
Impact Log User ID?
Show Charging Lights?
Date/Time/Timezone
*Default setting
2/2019
INSTRUCTIONS FOR USE
3
Supervisor selectable options
Replay Only*
User key plan permissions -- only replay; replay and record; replay,
Replay/Record
record, and delete plans
Replay/Record/Delete
No Add/Delete Tags*
User key location tag permissions -- no permissions, can add tags, can
Add Tags
add and delete tags
Add/Delete Tags
No*
Deletes all plans
Yes
No*
Delete all tags (and plans)
Yes
Ignore water meter and do constant flow with no feedback loop. Allows
No*
operator to keep cleaning in autonomous or manual mode with a broken
Yes
flow meter.
No
Over Current Protection can be disabled for using the machine on certain
Yes rubber flooring where current draw is higher than expected
Impact detection status
Log Only*
Log Only – Impact is recorded
Log & Lock
Log & Lock – Impact is recorded and User is locked out of scrub functions
(Display shows (X24)) until machine is reset with a Supervisor key.
High*
Impact detection sensitivity level. If nuisance tripping occurs (i.e. driving
Low over a floor transition), adjust setting to low.
No*
Whether to record the User ID in the impact log
Yes
Yes*
LED status bar will display a visual indication of the batteries level of
No charge while batteries are being charged (see page 51)
Set the date, time and timezone
Timezone
Choose timezone that matches machine's location
Hour
Set current time, hours in 24-hour format
Minute
Set current time minutes
Second
Set current time seconds
Year
Set current year
Month
Set current month
Day
Set current day
56091204 - Nilfisk Liberty SC50
ENGLISH - A
Notes
A - 17