Install The Squeegee - Nilfisk Liberty SC50 Instrucciones De Uso

A - ENGLISH

INSTALL THE SQUEEGEE

See Figure 2-6. Squeeze the back of the Squeegee Mount Bracket (AA) to open and release the bracket once it's in place over the deck
1
arm Pins (AB).
2 Lower the scrub deck and squeegee.
3 Connect the Recovery Hose (AC) to the squeegee inlet.
4 Move the machine ahead slightly. If necessary adjust the rear squeegee height using the Rear Caster Wheel (AD) so that the rear squeegee
blade touches the floor evenly across its entire width and is bent over slightly as shown in the squeegee cross section (AE).
FIGURE 2-6
A - 28
INSTRUCTIONS FOR USE
AB
Nilfisk Liberty SC50 - 56091204
AA
AC
AD
AE
2/2019