Nilfisk Liberty SC50 Instrucciones De Uso página 42

A - ENGLISH
PLAYBACK OF RECORDED PLAN, AUTONOMOUS MODE - CONTINUED
Machine Encounters an Issue While Cleaning in Autonomous Mode
1 While machine is successfully cleaning in autonomous mode. Machine may encounter any one of the scenarios listed below;
a. Machine is blocked – CANNOT plan around obstacle(s)
b. Machine needs to rescan Location Tag
c. Battery level low
d. Solution tank empty
e. Recovery tank full
f. Person continuously disturbing machine – preventing passage
g. Person steps onto machine for longer than 30 seconds
h. Sensors blocked
i. Machine impacted/hit by another vehicle/person
j. Machine system failure
k. Critical fault code present
2 In all cases the machine stops moving, the scrub deck stops and raises to the vac only height and the vacuum will run briefly until it times out.
Then all functions turn off.
3 Operator must return to the machine to clear/eliminate error. SmartKey must be placed on reader to access menu or restart.
A - 42
INSTRUCTIONS FOR USE
Nilfisk Liberty SC50 - 56091204 2/2019