Angelo Po 091FR1I Manual De Uso E Instalación página 50

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the door (A).
3 - Undo the screws (B) and replace the ignition
plug (C).
4 - Close the door (A).
IT
GB
DE
When decommissioning the appliance, a series of
procedures must be carried out to ensure that the
FR
appliance and its components are not a hindrance
and are not easily accessible.
ES
To ensure that the appliance cannot constitute haz-
ards for people or the environment, all energy
sources (electricity, etc.) must be disconnected and
rendered unusable, and any liquids present must
be drained (lubricants, fluids, etc.).
Place the appliance in a suitable area which is not
easily accessible, with barriers to prevent anyone
from accessing it.
English
REPLACEMENT THE IGNITION PLUG
A
C
DECOMMISSIONING AND SCRAPPING THE APPLIANCE
B
When scrapping, sort all components by chemical
characteristics and dispose of them separately in
accordance with the relevant legal requirements.
Important
Do not dump non-biodegradable products,
lubricating oils, and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in compliance
with the relevant laws.
- 24 -
IDM-39619402100.tif