miniland baby digimonitor 3.5 touch Manual De Instrucciones página 26

· Time alarm
You can set an alarm to remind you of the next feeding time of your baby.
Access the Time alarm submenu to activate or deactivate this alarm and set the time you
want the alarm to sound.
A beep will sound for 60 seconds at the preset time. Press the menu button (4) to stop the
beep and return to the main menu. The alarm will continue to be set unless you deactivate it.
· Auto Switch Time
This baby monitor offers the possibility of the monitor displaying the image of each camera
for a few seconds on a cyclical basis. From this submenu you can select the time you want
to display the image of each camera and the cameras to be included in the cycle.
· Zoom
You can increase the size of the image displayed by means of a central zoom. Click on the +
sign to zoom in or on the – sign to zoom out. It allows for a x3 enlargement, in steps of 0.2
increases.
· TV Out format
With this submenu you can choose the format of the output signal received by your TV. To
see or hear the baby from your TV, connect the AV output connector (12) of the monitor to
the socket of your TV, using an RCA cable (not included).
PAL: used in most European, African and Asian countries, in some South American
countries and in Australia.
NTSC: used in most of America and Japan.
· Touch Panel calibration
If you find that the touchscreen is not responding properly, you can calibrate it.
To do this, access the submenu and mark the four corners of the screen with your finger, as
indicated by the crosses that appear. After the process, press EXIT.
· Language
You can choose the language in which you prefer to display all the options on the monitor
from among the 8 available: Spanish, English, Portuguese, French, German, Italian, Polish
and Russian.
· Video Off Timeout
Maximum time during which the monitor image remains active; after this time the image
disappears but the sound continues to be heard. To reactivate the image just touch the
screen.
You can disable or enable the option by indicating, in the second case, the maximum time
value you want, from 5s to 180s in 5s intervals.
· Recording Schedule
This baby monitor offers the possibility of programming a specific recording period. To
enable this option, indicate the time you want recording to start and finish.
If you want this option to remain inactive, press OFF.
· Motion Detection
If you activate the motion detection mode on the monitor and there is no movement around
the camera, the camera will stop transmitting and will appear to be off. The monitor screen
will turn off when the camera is not transmitting. If you want to see you baby at any given