Appliance Model Overview; General Information; General Notes On The Manual And Safety; Disclaimer - AHT Ac Serie Manual De Instrucciones

en | AHT Cooling Systems GmbH

Appliance model overview

Commercial refrigeration appliance
Model Type
AC
B 912N
AC-XL
AC-S B 910N
AC-W B 913N
AC-M B 911N
*Model-specific deviations possible. Exact details can be found in the freight documentation. These must be
available at the operating company.
Technical specifications are subject to change without notice.
1

General information

1.1 General notes on the manual
and safety
This operating manual (referred to as the "manual")
forms an integral part of the appliance and must be
read to ensure safe and efficient operation. The
"Safety" section provides information on important
safety measures to protect persons, property, and ma-
terials. The various sections contain warnings/notes
related to the tasks they set out.
Instructions can be found in electronic form on our
website http://www.aht.at .
Tis manual is intended for the following target
groups:
– operator
– Operating staff
– Qualified staff: AHT service partners, AHT ser-
vice engineers, AHT customer service, AHT in-
stallation service
Staff: This term is used when the instruction is aimed
at all target groups.
Read the manual
– Keep this manual for future reference.
– This manual must be available and accessible to
on-site personnel.
– Personnel must read through the manual carefully
prior to use.
All figures represent symbolic representations.
1.2

Disclaimer

All information in this manual has been compiled in ac-
cordance with the standards and legal regulations ap-
plicable at the time it was written, as well as the exper-
ience of the manufacturer and qualified staff. The
manufacturer assumes no liability for damage to per-
sons, materials, or property (appliances, goods, etc.)
resulting from:
– Non-observance of the manual and the regula-
tions/safety instructions contained therein.
– Failure to comply with the local safety regulations.
– Inappropriate use.
– Use of unauthorized and non-trained staff.
– Technical modifications not authorised by the
manufacturer.
– Changes to factory settings not authorized by the
manufacturer.
409654_1_0120
External dimensions [mm]
Length x Depth x Height
1195 x 928 x 1973
706 x 766 x 1495
914 x 766 x 1495
716 x 771 x 1973
– Use of non-approved spare parts by the manufac-
turer.
– Use of accessories not approved by the manufac-
turer.
– Modifications, attachments and installations to the
device not authorised by the manufacturer. Only
modifications, attachments and installations au-
thorised by the manufacturer are permitted.
– Failure of the power supply or electrotechnical
safety devices.
– Typographical and printing errors.
Failure to observe the above points will invalidate the
warranty claims.
The contractually agreed obligations, the general con-
ditions of sale and delivery of "AHT Cooling Systems
GmbH" (referred to as "AHT") and, in addition, the
statutory provisions applicable at the time of conclu-
sion of the contract shall apply.
Technical specifications are subject to change without
notice.
The local trade and safety regulations and the basic
health and safety requirements for the device apply.
2
2.1
Safety and warning notices are indicated in this
manual by symbols and signal words. Signal words
refer to the risk level of the hazard.
Signal word
WARNING
CAUTION
NOTICE
Symbol
Appliance model overview | 1
Maximum total weight unit *
[kg]
255
135
150
165

Safety

Explanation of symbols

Meaning
Hazard with medium degree of risk.
May result in death or serious injury if
not avoided.
Low-risk exposure. May result in minor
or moderate injury if not avoided..
Important note for the avoidance of
material or property damage.
Meaning
General warning
Warning: electrical voltage
Warning: electrical voltage. Do not
connect damaged cables to the voltage
supply.
25 / 458