KPS PowerCompact3020 Manual De Usuario página 78

Reactive power (Var) in each phase and in the three-phase (or two-phase) connection
and the corresponding PF values.
NOTE: as a norm, reactive power is shown as a negative when capacitive and a
positive when inductive.
Apparent power (VA) in each phase and in the three-phase (or two-phase) connection
and the corresponding PF values.
PF values in each phase and in the three-phase (or two-phase) connection and the
relevant type (Ind = Inductive load; Cap = Capacitive load).
NOTE: the PF is always positive. As a norm, it is shown as a negative when active
power is generated and a positive when absorbed.
Average total power and PF (calculated on the basis of the integration time set. Values
can be reset).
Minimum instant values of total power and PF (values can be reset).
Maximum instant values of total power and PF (values can be reset).
- 78 -