Measurements Campaigns Menu 6.2.11.1 Measurements Campaigns; Usd Content; Measurements Campaigns - KPS PowerCompact3020 Manual De Usuario

6.2.11.1. Measurements campaigns

Select "Start Campaign" to view the Measurement Campaign configuration page.
From the choice of memorization frequency and duration of the campaign, will depend the MB employed by
the campaign on uSD. It 'is clear that a storage every second for a long period of time, would produce a
campaign very heavy and therefore not practical to analyze. To properly tune these parameters we
recommend that you refer to the following main criteria.
Campaign duration
Up to 12h
From 12 to 48h
From 48h to 2 weeks
From 2 weeks to 1 month
From 1 to 6 months
From 6 months to 1 year
If the number of records stored excedes 50.000, el instrumient closes the storage file and it automatically
opens another one, identified with the same name but with and increased progressive number (eg:
filename01, filename02, etc.), to avoidthey yield files too large, which later would jeopardize the proper
consultation by the software.
6.2.11.2. uDS content
Select "uSD Content" to review all stored data.
The following parameters can be set:
campaign name. Press
alphanumeric keypad in order to enter the desired name.
storing rate. The following options are available: 1" - 5" - 30" - 1' -
5' - 15'.
manual start. A campaign is started automatically and the firs page
of Voltage menu is displayed. "Rec" is displayed in the bottom bar.
To stop the campaign, return to the campaigns menu and press
"Stop".
Scheduled start. Select "Scheduled" to access the page for
scheduling a campaign and the start and end dates and times can
be set.
By selecting "Start" the instrument will automatically display the
first page of the Voltage menu. "Prog" is displayed in the bottom
bar. To stop the campaign, return to the campaigns menu and
press "Stop".
Suggested rate
There are three types of recordings:
manual or scheduled measurement campaigns.
fast transients.
inrush currents.
Measurement campaigns are identified by the name assigned to them, whereas
transients and inrush currents are identified by the abbreviations TRANS (transients)
or INRU (inrush)) respectively, which are numbered progressively. To scroll through
the various recordings, use the
to access a page with an
1 second
5 seconds
30 seconds
60 seconds
5 minutes
15 minutes
and keys.
- 95 -
File size
217 Mbyte
174 Mbyte
204 Mbyte
217 Mbyte
264 Mbyte
176 Mbyte