Inrush Current Setup; Measurements Campaigns Menu; Oscillo Measures Setup - KPS PowerCompact3020 Manual De Usuario

6.2.10.3. Oscillo measures setup

By selecting the Oscillo function the device shows the Oscillo setup measure menu:

6.2.11. Measurements campaigns menu

inputs to be measured: Currents or Voltages and frequency.
duration of the measure: 1 sec, 2 sec, 5 sec or 10 sec.
start measure.
communication will be temporarily suspend for the whole measure
duration. A "Measuring...." message will be shown on display.
leave oscillo function.
At the end of measure diplay will report the L1 parameter, reporting its
maximum and minimum detected values, the sampling time and the
number of samples taken.
The user could decide between:
exit (Exit = return to the oscillo setup)
repeat measure using the same settings (Repeat);
store data on uSd card (Store)
Use the and keys to scroll through channels (L1, L2 and L3) and to
select the proper button.
This menu allows the user to:
set a measurement campaign.
view the data store don the uSD card.
- 94 -
During measurement keyboard, display and