Wayne Dalton 9100 Instrucciones De Instalación Y Manual Del Propietario página 26

26
Attaching Disconnect Cables
Tools Needed:
NOTE: See idrive
owners manual for idrive
Pliers
Attach the loose disconnect cable
(located in opener hardware bag) to the
opener with the "S" hook. Close both
ends of the "S" hook (with pliers) to lock
assembly together.
Thread the disconnect cable (behind the
counterbalance cable) through the hole
in the right hand end bracket; remove
all slack between opener and right end
bracket.
27
Tools Needed:
NOTE: See idrive
Pencil
owners manual for idrive
Tape measure
Mark a location on the right jamb, 6
1/8" Drill Bit
feet above the floor to mount the
disconnect handle bracket.
7/16" Socket
Driver
Drill 1/8" pilot holes for the lag screws.
Power Drill
Align top of the bracket with the mark.
Fasten bracket to the jamb with
(2) 1/4" x 1-1/2" lag screws.
26
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
® main installation and
®
parts.
Mounting Disconnect
Handle Bracket
®
main installation and
® parts.
S-HOOK
RIGHT SIDE OF
END BRACKET
HOLE IN
END BRACKET
DISCONNECT
CABLE
HOLE IN RIGHT
END BRACKET
CLOSE "S" HOOK
6ft
(2) 1/4" X 1-1/2"
LAG SCREWS
DISCONNECT
HANDLE BRACKET