Brewing Buttons Programming - Saeco IDEA Manuel De Uso Y Mantenimiento

STEAM
(Except COFFEE set-up)
• Immerse the spout (17) in the beverage to be heated.
• Turn the knob counterclockwise (12). When the required
temperature is reached, close the knob (clockwise).
After every operation, clean the steam spout with a
(damp and clean) cloth/sponge from the residues of
the previously heated beverage.
(*) Before any brewing, place the milk suction tube (30
- F. 4) inside the milk container.
(**) Adjust the cream quantity using the pin (24 - F. 4)
(Pr. 12.8).
12.6

Brewing buttons programming

The beverage quantities linked to the respective buttons,
can be directly programmed by keypad.
To program and re-program the buttons follow these in-
structions:
- Switch on the machine and prepare it for the use
- Place the container under the selected spout
- Push and hold the button. The message "PROGRAM-
MING" will be displayed
- Release the button and set the dose to be brewed
(***) N.B.: Keys ,
brewing beverages with any possible combination of
milk and coffee. Please refer to an authorized customer
service center to change default settings.
Here is the button programming scheme.
and can be preset for
English
169