English
27
F. 16
13.1.2 Brew group (F. 16)
Cleaning must be carried out with the group empty.
• Periodically clean the brew group using the special ta-
blets (Pr. "12.7.1 Explanation of functions – CLEANING
GROUP").
-
Remove the brew group (28) pulling the appropria-
te handle (A) and pressing the button marked by
"PRESS".
-
Wash abundantly with warm water.
Do not use detergents.
-
Delicately scrape the upper filter (B) with a plastic coffee
13.1.3 Drip tray and relative grill
Remove the drip tray (13) from the machine and wash it with
running water, paying particular attention to the grill.
13.1.4 Dump box
Remove the drip tray (13), remove the dump box (16) from
its place and then wash it with running water .
13.1.5 Steam and hot water spouts
(except COFFEE set-up)
Clean the spouts (11-17) with a non-abrasive damp
cloth.
If the nozzles are clogged the final section of the spouts
can be unscrewed, and the nozzles can be cleared with
a pin.
13.1.6 Cup warming plate
Use a non abrasive damp cloth to clean the cup warming
plate (4).
178
B
A
13.1.7 Coffee bean hopper
Use a non abrasive damp cloth to clean the coffee bean
hopper (6 and 29).
13.1.8 Cappuccinatore cleaning
Never clean the cappuccinatore when the machine
is on "standby".
Every time the CAPPUCCINATORE is used, it must
be cleaned in order to avoid the solidification of
residues.
All the removable parts must be washed and rinsed
in running water.
13.1.9 Cappuccino brew group (F. 17)
To clean each part of the cappuccinatore group separately,
remove:
-
the top protection cover (23), by pulling it outwards;
-
remove the cappuccinatore (29) by pulling it ou-
twards;
-
the fork (32);
-
the cream adjustment lever (24);
-
la temperature setting lever (25);
-
the cappuccinatore body cap (33);
-
the fitting (31) connecting the suction pipe to the body
of the cappuccinatore;
-
the milk dispenser (26);
-
milk suction tube (30)
F. 17