Pontos AquaCycle 2500 Instrucciones De Montaje página 207

115 (L02 failure) Cable breakage, contact
fault at plug, faulty
Cable break?
pressure transmitter
116 (L03 failure) Cable breakage, contact
fault at plug, faulty
Cable break?
pressure transmitter
117 (battery empty) The controller's clock
battery is very low or flat
Clock battery empty
Version 2.5
Operating Manual AquaCycle 2500
Aeration V2 and
submersible pump P2
switch off
System goes to "failsafe
mode"; drinking water and
rainwater feed are
deactivated
No reaction.
Replace sensor cable
L02, check plug and
pressure transmitter
Replace sensor cable
L02, check plug and
pressure transmitter
Have the battery in the
controller replaced by a
skilled electrician.
EN 63