Merrychef 402s Instrucciones De Instalación Y Operación página 20

Ocultar thumbs Ver también para 402s:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING: 1
For the oven to operate at peak efficiency, the cavity, door and air filters and grease filter must
be kept clean.
A daily cleaning routine will ensure that you comply with the required hygiene standards and will help
to maintain and prolong the efficiency of your oven.
Follow the SAFETY INSTRUCTIONS at the beginning of this manual.
WARNING: DO NOT use caustic cleaners on any part of the oven or oven
cavity as it will cause permanent damage to the Catalytic Convertors
• ALWAYS switch off at the electrical supply before
cleaning
• Complete COOL DOWN procedure and allow the
oven and accessories to cool before commencing
cleaning
• As required wipe out spillages with disposable
paper wipes
• NEVER use steel wool, knives or harsh abrasives
on any part of the oven
As with all electrical appliances, it is wise to have the
electrical connections inspected periodically.
DO NOT use the oven without clean air filters and cavity grease filter in place
START UP: OVEN COATING PROCEDURE ( clean oven )
1.
Spray Merrychef Oven
Protector onto the
sponge
2.
Spread Oven Protector
lightly onto all internal
surfaces of the oven
Note: oven protector turns light brown when cured
Faults arising from neglect or
misuse including use without clean
filters in place are not covered
by the guarantee. Service visits
as a result of such faults will be
chargeable.
3.
Spread Oven Protector
lightly onto the internal
surface of the oven door
20
Hot surface
Hazard
4.
Switch on the oven and
pre–heat. When the oven
has reached operating
temperature it will take
about 30mins to cure the
Oven Protector.

Publicidad

Tabla de contenido
loading

Tabla de contenido