Operating Resources; Etr Tank Filling Quantity - Jungheinrich ETR 314 Manual De Instrucciones

5.1

Operating resources

Handling of operating resources:
Operating resources must always be used properly and in accordance with the
manufacturer's instructions.
Qw W
Improper handling can endanger health, life, and the environment. Operating
resources must only be stored in suitable containers. They may be flammable
and must, therefore, not be brought into contact with hot components or
naked flames.
Only clean containers should be used to fill operating resources. Different grades of
operating resources should never be mixed. The only exception to this rule is if mixing
is expressly stipulated in this Operating Manual.
Be careful not to spill liquids. Liquid spillages must be removed immediately using a
suitable binder. The mixture of binder and operating resources must be disposed of
in compliance with applicable regulations.
Code Order No.
A 50 449 669
B 29 200 680
C 29 200 810
E 29 201 430
F 50 430 702
G 29 201 280
J 29 202 020
Grease reference values
Code Saponification
E
F
5.2

ETR tank filling quantity

Filling quantity 6.87 - 7.9 gal (26 - 30 l)
Filling quantity is independent of lift height.
Filling quantity always up to the level indicator in the tank.
Quantity
5,0 l
1.32 gal
5,0 l
1.32 gal
5,0 l
1.32 gal
1,0 kg
2.2 lbs
1,0 kg
2.2 lbs
0,400 l
0.11 gal
5 l
1.32 gal
Drop
point °C
type
Lithium 185
-- --
Designation
HLP-D 46,
DIN 51524
CLP 100,
DIN 51517
HLP 10,
DIN 51524
Grease, DIN 51825 Lubrication service
Grease, TTF52
Chain spray
AeroShell Fluid 41 Hydraulic system
Walk penetration
at 25 °C
265 - 295
310 - 340
Use for
Hydraulic system
Gearbox
Gearbox
Lubrication service
Chains
NLG1 Handling
temperature °C
Class
2 -35 / +120
1 -52 / +100
G 11