Adjusting The Fork Tines; Raising And Lowering Load Units - Jungheinrich ETR 314 Manual De Instrucciones

3.4

Adjusting the fork tines

Qw W
In order to pick up the load
securely, the tines should be
adjusted as far apart as possible
and centered to the vehicle. The
load center must be in the center
of the tines.
– Lift up the stop level (20).
– Move the fork tines (21) on the fork
carrier (22) into the correct position.
– Push the stop lever down and shift the
fork tines until the stop lever snaps
into a notch.
3.5

Raising and lowering load units

IMPORTANT Before lifting a load unit, the
driver must be sure that it is
palleted correctly and does not
exceed
capacity of the vehicle.
– Drive the fork tines as far as possible
under the load unit.
the permitted load
20
21
22
E 35