Chevrolet Performance LT1 Manual Del Usario página 5

PUMP OUTLET
PUMP INLET
HEATER INLET PIPE
HEATER OUTLET PIPE
Engine Oil Cooling
The engine as delivered comes with a liquid to liquid engine oil cooler. Engine oil is pumped thru the cooler and engine coolant is
pumped thru the cooler, to transfer the engine oil heat into the engine coolant. The engine coolant should route to the lower portion
of the radiator, or inlet hose of the coolant pump. Heat is then removed by the engine radiator. Reference the 2019 Camaro LT1 for
additional parts.
Cooler hose and
attachment bolt
Evaporative Emissions Valve
The evaporative emissions system can be used with the Chevrolet Performance engine control kit, but is not required for proper
engine operation. This port must be either plugged or connected to a vapor canister.
Performance Crate Engine
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
CYLINDER HEAD AIR BLEED
(SMALL PIPE)
Attach to lower radiator hose
for proper coolant flow
IR 02MY18
DATE
02MY18
19416593
PART NO.
REVISION
Initial Release - Rocko Parker
5 27
SHEET OF
AUTH
N/A