Publicidad
Idiomas disponibles
Idiomas disponibles
EVAP HOSE
Pilot Bearing (if using a manual transmission)
You must install a pilot bearing in the rear of the crankshaft, if the engine will be used with a manual transmission. The pilot
bearing aligns the transmission input shaft with the crankshaft centerline. A worn or misaligned pilot bearing can cause shifting
problems and rapid clutch wear. There are two different Chevrolet pilot bearings for the LT1. 14061685 is for a long input shaft
transmission and 12557583 is for a short input shaft transmission. Verify fit prior to installing the transmission or damage will occur.
Brake vacuum port
The rear plug can be removed to connect a vacuum hose for vacuum accessories. Reference the 2019 Camaro LT1 for additional
parts.
VACUUM PORT FOR
BRAKE BOOSTER
Starter Motor
A starter motor is not provided with the engine. The following parts are designed for the LT1 starting system and may assist with
your installation. Please reference a 2019 Camaro with a LT1 engine for current part numbers.
ENGINE STARTER MOTOR
AND BOLTS
Performance Crate Engine
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
CONNECT TO EVAP CANISTER
HEAT SHIELD
AND BOLTS
19416593
IR 02MY18
PART NO.
DATE
02MY18
Initial Release - Rocko Parker
6
SHEET
REVISION
27
OF
AUTH
N/A
Publicidad
