Application Settings - OHAUS Defender 6000 Manual De Instrucciones

EN-18
3.2.3.5 Clear Check Limits
Long press the Target button until the display shows the under and over values.
Press the CLR button of i-DT61XWE indicator or the
Clr.CHk
. Press the Yes button to clear both the under and over values.

3.2.4 Application Settings

The application can be customized for user preferences.
To enter application settings:
1. Long press the Menu button until you see
mM.O.d.E
. Press the Yes button to enter the application mode settings.
2. Short press the No button several times to navigate until you see the selection you want.
3. Press the Yes button to select.
4. Repeat step 2 and 3 several times until you finish all settings.
5. Press the Exit button to exit.
The Weighing Configurations are defined below (defaults in Bold).
Item
wWeIGH
Weighing （
）
Note: you cannot disable Weighing if you are in the mode currently.
C.A.L.
Short press the No button several times until you see
Available Settings
On, Off
button of i-DT61PW indicator, the display shows
Comments
To enable Weighing
Defender 6000 Indicators