Filling Mode; Enter The Mode; Start Filling; Resume And Pause Filling - OHAUS Defender 6000 Manual De Instrucciones

Ocultar thumbs Ver también para Defender 6000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN-22
Note: you cannot disable Dynamic if you are in the mode currently.

Filling Mode

3.6
Use this application to fill a container to a pre-determined target weight.
Note: filling mode is only available for i-DT61XWE model.

3.6.1 Enter the Mode

To enter the Filling mode from any application mode:
Press and hold the Mode button until
1.
2.
The actual weight is displayed on the display.

3.6.2 Start Filling

1
When the scale is in stop or pause status, press the Function button to start filling process. The output
port will be enabled.
2
Add weight on the pan. When one set point (SP1/SP2/SP3/SP4) is reached, the related output port will be
disabled.
3
When the scale is in start or pause status, press the Function button to stop filling process. The output
port will be all disabled.

3.6.3 Resume and Pause Filling

1
When the scale is in pause status, press the Target button to resume the filling process. The output port
will be enabled or disabled according to the current load value.
2
When the scale is in start status, press the Target button to pause the filling process. The output port will
be all disabled, and the display will be frozen.

3.6.4 Display of the Dot Matrix Screen

The Dot Matrix Display will be divided into one to four columns according to how many set points (SP) are valid.
The maximum is four columns. For example, if you set four SPs, then the screen will be divided into four
columns. In addition, the screen will display different colors according to the load value.
For example:
1.
You set four valid SP values and SP1 is less than SP2, SP2 less than SP3,
SP3 less than SP4. Then the screen will be divided into four columns.
2.
To start filling, if the first load is less than SP1, the first column displays
orange, and others red.
3.
If continue to fill the second time, and the total load is now more than or equal
to SP1 while less than SP2, the first column displays green, the second
orange, and others red.
FIll
is displayed.
Defender 6000 Indicators

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido