Counting Mode; Enter The Mode; Establish An Apw; Start Counting - OHAUS Defender 6000 Manual De Instrucciones

Defender 6000 Indicators

Counting Mode

3.3
Use this application to count samples of uniform weight.

3.3.1 Enter the Mode

To enter the mode:
1. Press and hold the Mode button until
When the Mode button is released, the display shows
2.
3. If you need to clear the stored APW of the last time, press the Yes button. Then go to Establish an APW
section.
Note: if the weight on the pan is larger than 1d, the display will show
from the pan.
4. If you need to recall the stored APW of the last time and continue to use it, press the No button to start
counting.
Note: if no APW has been set before, step 3 and 4 will be omitted.

3.3.2 Establish an APW

To establish an APW:
1. Follow the previous step 4.
 i-DT61PW:
The display shows the sample size
see the value you want.
Note: available sample size selections are 5, 10, 20, 50 and 100 (The default is 10).
i-DT61XWE:

The display flashes with the current sample size, such as 10 Pcs. To change it, input the new sample size
through the numeric keyboard. Do not press the Yes button until you finish the next step.
Place the specified quantity of samples on the pan and press the Yes button to capture the current stable
2.
weight.
Note:
 During the capture process, the display shows
You can press the

If the APW is between 0.1d and 1d, the display shows

 If the APW is less than 0.1d, the display shows
is displayed on step 1. Please replace the samples on the pan and press the Yes button to re-establish an
APW value.

3.3.3 Start Counting

1. Place parts on the pan and read the number. The number of pieces and the Pcs icon are displayed.
2. Press the Function button to temporarily display the APW.
APW value is displayed for 1.5 seconds using the current unit of measurement.
Note: Please refer to Check in the Weighing Mode section for how to use Check in the Counting mode.
3.3.4 Application Settings
The application can be customized for user preferences. Please refer to Application Settings section in
Weighing Mode for details about how to enter application settings.
The Counting Configurations are defined below (defaults in Bold).
Item
COUNt
Count （
）
A.OPt
Auto Opt.（
）
Note: you cannot disable Count if you are in the mode currently.
COUNt
is displayed.
PUt.10
. To change it, short press the No button several times until you
- - - - -
button to tare. The center of zero, PT or NET icons will light as appropriate.
rEF.Err
Available Settings
, Off
On, Off
CLr.PwW
.
CLr.PAN
. (i-DT61PW)
LO.rEF
for 1.5 seconds. Then it will start counting.
for 1.5 seconds and then return to showing what
APwW
is displayed for 0.5 seconds. Then the
Comments
To enable Counting
Off: Auto Opt. is off.
On: The APW will be optimized
automatically during count weighing.
EN-19
until the weight is removed