Initial Installation - Harbor Breeze CC52WW5C Manual De Instrucciones

INITIAL INSTALLATION

1.
Turn off circuit breakers and wall switch to the fan
supply line leads. (Fig. 1)
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
Check to make sure blades (G) are at least 30 in.
2.
from any obstruction and at least 7 ft. above the
floor. (Fig. 2)
Remove all mounting bracket nuts (K) and
3.
mounting bracket flat washers (J) from mounting
bracket (A). (Fig. 3)
4.
Secure mounting bracket (A) to outlet box using
screws, spring washers, and flat washers
provided with the outlet box. (Fig. 4)
*Note: It is very important that you use the
proper hardware when installing the mounting
bracket (A) as this will support the fan.
1
2
3
K
4
6
G
30 in.
min.
7 ft.
min.
A
J
A