Appliance Description; Operating The Hob With The Sensor Keys - Teka GKST80I4 Instrucciones Para El Uso Y Montaje

Appliance description

Appliance description
The decorative design may deviate from the illustrations.
1. Front left induction cooking zone
2. Back left induction cooking zone
3. Back right induction cooking zone
4. Front right induction cooking zone
5. Touch-control operating panel
6. Control keys, front left cooking zone
7. Control keys, back left cooking zone
8. Timer control keys for the back right cooking zone
9. Control keys, back right cooking zone
10. Control keys, front right cooking zone
11. ON/OFF key
12. Minus key (lower)
13. Plus key (raise)
14. Power setting display
16

Operating the hob with the sensor keys

The glass ceramic hob is operated by means of "touch control"
sensor keys which are located at the front of the hob.
The sensor keys are operated as follows: with your fingertip,
lightly touch the symbols
face.
For purposes of simplification, the following describes the "keys".
ON/OFF key (11)
This key is used to switch the respective cooking zones on and
off.
Minus key (12) / Plus key
These keys are used to select the required power setting from 1
to 9.
Important: Pressing the two cooking zone keys for front left and
front right simultaneously will activate the child safety device on
the left or the right (symbol
Power setting display (14)
The power setting display shows the power setting which has
been selected, or if the cooking zone is switched off it will indicate
for residual heat present.
The power setting display will blink for pan detection.
will be displayed when the safety cut-off device has switched
off.
will be displayed when the child safety device has been acti-
vated.
A row of dashes or "F7" will be displayed when the overheat pro-
tection device has been activated.
GB
, or on the glass ceramic sur-
(13)
).