ARIETE Gran Gelato metal 693 Manual De Instrucciones página 13

- Press the stop button (O) and unplug the appliance.
- Remove the power unit (H) and the lid (F), by turning it anticlockwise, and the removable container
(D). Place the finished ice cream in another container, using the plastic scoop (R) (Fig. 7);never
use a metal utensil, as this could scratch the removable container (D).
- If 10 minutes after the ice cream making process is complete and the acoustic signal has been
heard 10 times, the appliance is not switched off using the stop button (O), the "extended chill
function" will start automatically so as not to allow the ice cream to melt.
Extended chill function
The appliance starts this function (no mixing) for 10 minutes every 10 minutes for a total of 1 hour
before returning to the initial state (power on but appliance not operating).
IMPORTANT: always unplug the appliance when serving the ice cream to prevent any risk of electric
shock.
Adjustments while operating
- To stop operation, press the start/stop button (O) for 3 seconds or press the power button (P) once
during the ice cream making process.
- While the appliance is operating, it is possible to extend operating times as required by pressing
the Timer button (N) repeatedly; each time the button is pressed adds 10 minutes up to a maxi-
mum of 60 minutes. Time can only be increased, not decreased.
How to extend operation (after the ice cream has been made).
For a thicker ice cream, after the previously set time is over and the machine has stopped and
returned to its original state, it is possible to add a time of 10, 20, 30, 40, 50, 60 minutes by pressing
the Timer button (N) and then the start/stop button (O). This way, the appliance will start again for
the required time and then stop and return to the extended chill function so that the ice cream does
not melt.
CLEANING
WARNING: NEVER PLACE THE POWER BASE OF THE APPLIANCE, THE PLUG OR THE
POWER CORD IN WATER OR OTHER LIQUIDS. CLEAN BY WIPING WITH A DAMP CLOTH.
WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
IMPORTANT: To extend the life of the ice cream maker, never wash any of its parts in the dish-
washer.
Disassemble the appliance as described previously.
Wash the removable container (D), mixing paddle (E), lid (F), goblet (Q) and scoop (R) in warm soapy
water. The dry thoroughly.
Clean the fixed container (C), power unit (H) and appliance body (A) with a damp sponge or cloth.
- 11 -
EN