List Of Programme Commands; To Set Refrigeration Parameters; To Set Machine Parameters - FAS FASTER GCD Manual Del Usuario

18
9.1

LIST OF PROGRAMME COMMANDS

ACCESS TO SUBMENUS
Command 01
Command 02
Command 03
Command 04
Command 05
Command 06
Command 07
Command 08
Command 09
Command 10
Command 11
Command 15
E
Command 25
N
Command 26
G
L
COMMANDS 27÷39
I
Mode EXECUTIVE
S
H
Mode BDV
Mode MDB

TO SET REFRIGERATION PARAMETERS

Command 40
Command 41
Command 43
Command 44
Command 45
Command 46
Command 48

TO SET MACHINE PARAMETERS

Command 49
Command 50
Command 55
Command 56
Command 58
Command 59
Command 60
Command 61
Command 62
Command 63
Command 64
Command
66-67
Command
68
Command
69
Command
70
Command
73
Command
74
Command
75
Command
76
Command
80
Command
85
Command 88
Command 90
Command 91
Command 92
Command 95
Command 99
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Machine test
Calls submenu for setting the clock & daily timers
Recall of price setting submenu
Calls submenu for setting discounted prices
Recall the price reference setting submenu
Setting the product code
Display of sales for full price selection
Displays sales for selection discounted price
Displays totals cashed not clearable
Displays totals clearable
Setting the selection sequences
Concatenated menus
Enable change unit motor and coin input micro
Child-proof device activation (if present)
see paragraph: USING THE EXECUTIVE STD/EXECUTIVE PRICE HOLDING
PAYMENT SYSTEMS.
see paragraph BDV.
see paragraph MDB.
Enable heated double-glazing and fridge unit selection on MASTER and SLAVE
Sets cabinet temperature
End defrosting temperature setting
Sets defrost cycle frequency
Setting the cut-out duration for the refrigeration safety device
Setting the trigger temperature for the refrigeration safety device
Setting trays with refrigeration safety device
Enable/disable slave spirals
Machine configuration (number of selections/pusher drawers/ drive time-out)
Price display bars enable multifunction (if present)
Price display bar operating options
Mode enable confirms selection or pre-selection
Stroke counter
Erases the memory
Reset security/access code
Enable discount
Set the mono/multivend and overpay option
Sets the message display language
Internal temperature and evaporator temperature display
Setting displayed currency description
Payment system settings
Buzzer operation option/Graphic display background
Enabling the photoelectric cells
Photocell test
Setting the operating parameters of the photocell barrier
System's operating options ("FTC Options ")
USB management menu
Display of checksum and main and power board software version.
Product heating enabling on WAVE MODULE (if present):
Selecting the AUDIT / telemetry enabling protocol
Enter machine identification data
Clear sales data
Setting the display functions (user message box/internal slide show/USB slide
show)
Access to the event display menu
FASTER GCD – Issue 03
(if present)