Procedure For Changing The Temperature Management Side-Panel - FAS FASTER GCD Manual Del Usuario

42
E
N
G
L
fig.7
I
S
H
fig.8
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
10.5 PROCEDURE FOR
TEMPERATURE MANAGEMENT SIDE-
PANEL
In order to change the stratification of the
temperatures inside the machine it is necessary
to use the proper side-panel as explained in
Chapter 3.
To change the side-panels in the vending
machine:
• remove
the drawers
previously
• remove all the guides, ref. B
• act on the top part of the perforated side-
panel by pulling it towards the inside of
the machine as in fig. 8.
•
It is now possible to extract the side-
panel and fit the desired one, following
the inverse procedure.
FASTER GCD – Issue 03
CHANGING THE
as explained