Instructions For Converting The Trays - FAS FASTER GCD Manual Del Usuario

44

10.7 INSTRUCTIONS FOR CONVERTING THE TRAYS

from one large space to two small spaces.
•
Switch off the machine by means of the main switch and pull out the power plug.
•
Open the door.
•
Remove the neon cover.
•
Pull out the tray to be modified.
•
Remove the spiral + motor unit det.1.
•
Remove the tray det.3.
•
Replace the spiral with large diameter with a spiral with small diameter.
•
Insert the spiral with small diameter + motor unit in the left hand slot on the support det. 4.
•
Insert the new spiral with small diameter + motor unit in the right hand slot and connect it to the wiring on
the tray.
•
Add the new divider in between the two spirals det. 2.
E
•
Install the new price and selection labels.
N
•
Insert the modified tray and make sure that the connector is plugged in.
G
•
Programme the new selections at the desired sale price.
L
•
Test the new selections to ensure that they work correctly.
I
S
H
from two small spaces to one large space.
•
Switch off the machine by means of the main switch and pull out the power plug.
•
Open the door.
•
Remove the neon cover.
•
Pull out the tray to be modified.
•
Remove the spiral + motor units det.1.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
FASTER GCD – Issue 03