Keeping Order; Safety Labels; Product Description - Mennekes AMEDIO Proffesional+PnC 22 T2S Manual De Instrucciones Y De Instalación

2.4.4 Keeping order

A charging cable lying around presents a trip hazard.
Objects on the device may fall.
f Minimise trip hazards.
f Stow the charging cable properly or use the cable
holder after charging.
f Do not place any objects on the device.

2.5 Safety labels

Safety labels that warn of hazardous situations are affixed
on some of the device components. If the instructions
on the safety labels are not complied with severe or fatal
injuries can occur.
Safety labels
Symbol
Danger – high voltage.
f Prior to performing tasks on the
device, ensure that it is de-ener-
gised.
Danger if the instructions in the
accompanying documents are not
complied with.
f Prior to performing tasks on the
device, read the accompanying
documents, particularly the instal-
lation and operating manual.
f Comply with the instructions on the safety labels.
f Clean contaminated safety labels to keep them legible.
When cleaning do not use aggressive cleaning agents.
f Replace safety labels that have been damaged or have
become unreadable.
f After replacement, affix the intended safety labels on
spare parts or accessories.
Meaning
3

Product description

Equipment features
„ Charging power of up to 7.4 kW (single-phase) / 22 kW
(three-phase).
„ Communication between device and vehicle in accord-
ance with ISO 15118 - Plug and Charge (PnC). *
„ USB ethernet adapter and ethernet surge protection
for local networking of several devices. *
„ System monitoring.
„ Authorisation via Backend-System or RFID card
(ISO 14443A / MIFARE classic and MIFARE DESFire).
„ Integrated modem for mobile network standards 4G
(LTE), 3G (UMTS) and 2G (GSM).
„ Compatible with OCPP 1.5 and OCPP 1.6.
„ MENNEKES ECU, Electronic Control Unit.
„ Status information through LED information panel.
„ Calibrated energy meter (MID approved only for the
three-phase mains connection).
„ Line circuit breaker.
„ Type A residual current circuit breaker.
„ DC residual current monitoring > 6 mA.
„ Type 2 surge protection (Typ 1 + 2 lightning and surge
protection as an option).
„ Shunt release. *
„ 2 type 2 charging sockets (mode 3) with hinged lid. *
„ 2 type 2 charging sockets (mode 3) with shutter. *
„ Release function in case of power failure for charging
with type 2 charging plug (mode 3).
„ Housing made of black sheet that is galvanized and
powder coated.
„ Cover made of plastic.
„ Wired ready for connection.
* optional
EN
5