Mennekes AMEDIO Proffesional+PnC 22 T2S Manual De Instrucciones Y De Instalación página 77

UTC time for housekee-
ping reboot
Vehicle connection
timeout
Lock Actuator only if
authorized
Permanently locked
cable
Temperature Report
Delta
RCMB Delta
Energy management
from second meter
Current limit for ener-
gy management from
second meter
Energy management
from external input
Current limit for ener-
gy management from
external input
Operator Password
USB Installer Password
State page password
protection
Led colour scheme
HMI beep
Log Level
Time for restart of the device
Time that is allowed to elapse between an authorization
and connection of the vehicle to the device, in order to
start a charging process
Locking of the charging plug only after authorization
Permanent locking of the charging plug
Temperature change (in °C), that is necessary in order to
send a temperature report to the Backend-System
Differential current change (in 0.1 mA) that is necessary
for sending an OCPP status notification to the Backend-
System
Energy management using an external meter
Current limit (in A) for energy management using an exter-
nal meter
External management using an external switching contact
Current limit (in A) for energy management using an exter-
nal switching contact
Password for the web interface
Activates password protection for the "State" page
Colour scheme of the LED information panel
Activates the acoustic signal transducer
Scope of the data logger
Not relevant for the device
A restart will be
performed every
30 days
Charging
system
This setting
has to be made
separately in the
slave web inter-
face
Backend-
System
This setting
has to be made
separately in the
Charging
slave web inter-
system
face
This setting
Charging
has to be made
system
separately in the
slave web inter-
face
EN
33