Axonics 2501 Manual Del Programador página 66

Viewing the Status of a Neurostimulator
Stimulator Errors
1
If a Stimulator error is present, a "View Error" button will appear
to the left of the "Disconnect" button in the lower right corner
of the Patient Device screen.
2
When the "View Error" button is pressed, a pop-up will appear
( 1 ) with a description of the error ( 2 ).
To resume the communication session and try to resolve the
error with reprogramming, press "Clear Error" ( 3 ) to remove
3
4
the error notification from the Stimulator. If additional errors
exist, the pop-up will display information about the next error,
which will also need to be cleared.
Press "Close" to exit the pop‐up ( 4 ). If the pop‐up is exited
without clearing the errors, the ability to program the Stimulator
may be impaired.
Contact Axonics for assistance with Stimulator Errors.
62
110-0085 rev E.indd 62 5/7/2020 11:53:48 AM