Introduction; Purpose Of The Trial System - Axonics 2501 Manual Del Programador

INTRODUCTION

This manual provides information about the Model 2501 Axonics Sacral Neuromodulation (SNM) System Clinician
Programmer (CP). The CP can be used during implantation and programming of the following Axonics SNM System
components:
Axonics Model 1601 Trial Stimulator
•
Axonics Model 1901 PNE Lead
•
Axonics Model 1201, 2201 Tined Lead
•
Axonics Model 1101 Neurostimulator
•
Purpose
The CP can provide test stimulation during lead implantation and can wirelessly communicate with the Stimulator
(Neurostimulator or Trial Stimulator) to check device status and program the device.
Note: The CP is required to implant a lead (tined lead or PNE lead) or program a Stimulator. Confirm the availability and operation of a CP
prior to beginning a lead implant procedure.
Package Contents
Axonics Model 2501 Clinician Programmer
•
Power Supply
•
Product Literature
•
Caution: Do not sterilize any part of the clinician programmer. Sterilization may damage the programmer.

Purpose of the Trial System

The Axonics SNM Trial System is used for a test period to evaluate if a subject should be treated with the Axonics SNM
System.
4
110-0085 rev E.indd 4 5/7/2020 11:53:05 AM