J.P. SELECTA MP-2006 Manual De Instrucciones página 65

You can select ion measuring part, conductive measuring part and DO measuring part
simultaneously or you can select individual parameter to measure. The left side of the screen is the
selectable measuring parameters. The right side is selected measuring parameters. Press selected
parameter display area once you can delete one selected parameter. Press relevant measuring
parameter in 'Select parameter' area on left side, you can select measuring parameter. When
selecting finishes, press 'X' (quit) to exit 'set menu'.
4.4.1.2 Select Ion Concentration Measuring Mode
When you select measuring ion concentration, meter will shield other measuring parameter
automatically, i.e. measure ion concentration should be done solely and can not be measure with
other parameter at same time.
When you select measuring ion concentration, you need to select 'ION Conc' measuring mode
including Direct Reading mode, Known Addition mode, Sample Addition mode and GRAN
Method measuring mode etc... which is shown as following chart, user could select suitable
concentration measuring mode according to measuring requirement.
For detailed ion concentration measuring, please refer to chapter 'ion concentration
measuring'
Display chart of Select Parameters'
Display chart of set ion concentration
measuring mode
62