Descargar Imprimir esta página

J.P. SELECTA MP-2006 Manual De Instrucciones página 97

Publicidad

Idiomas disponibles

Idiomas disponibles

Chart 4 Relationship between conductivity and TDS standard solution
conductivity
μS/cm
23
84
447
1413
1500
2070
2764
8974
12880
15000
80000
1. 442 stands for 40%Na2SO4、40%NaHCO3、20%NaCl。
2.The value listed in above chart is the value under 25
4.6.4.3 Salinity Measuring
Before measure salinity, you must refer to chapter 'Selection of Conductive Electrode' to confirm
the conductive electrode to be used in measuring, set suitable electrode constant.
When measure salinity, we usually adopt conductive electrode with constant 10. When salinity
≥ 1.00%, you must adopt the electrode with electrode constant 10.
Under start mode, if you have already selected conductive measuring mode parameter, such as
conductivity parameter, you can start measuring directly. Otherwise, you should enter into 'Setup
Measuring Mode', select conductive measuring unit to measure. (Please refer to 'Set Measuring
Mode' for details).
For the display, measuring procedure and operating, please refer to chapter 'conductivity
measuring'.
4.6.4 Dissolved Oxygen Measuring
Meter could measure dissolved oxygen concentration, dissolved oxygen saturation and electrode
current. Meter has automatic temperature compensation function and could make zero oxygen
calibration, full scale calibration, atmosphere calibration and salinity calibration.
When meter is used for first time, clean the dissolved oxygen electrode with distilled water
an insert into measured solution. When meter is turned on, you can make the measurement.
Meter calculates, displays dissolved oxygen concentration (or saturation) and electrode
current value.
If this is your first time using or long time not using the meter, please calibrate dissolved
oxygen electrode first, you can refer to chapter Dissolved Oxygen Calibration for details.
KCl
(mg/L)
NaCl
11.6
10.7
40.38
38.04
225.6
215.5
744.7
702.1
757.1
737.1
1045
1041
1382
1414.8
5101
4487
7447
7230
8759
8532
52168
48384
TDS Factor
(mg/L)
442
14.74
50.5
300
1000
1050
1500
2062.7
7608
11367
13455
79688
(mg/L)
94

Publicidad

loading

Productos relacionados para J.P. SELECTA MP-2006

Este manual también es adecuado para:

4120700