J.P. SELECTA MP-2006 Manual De Instrucciones página 66

4.4.1.3 Select Measuring Mode
Meter supports three measuring modes: Continuous measuring mode, Timed Reading measuring
mode, Balance Reading measuring mode which can be selected directly at current measuring
mode display area.
4.4.1.3.1 Continuous Measuring Mode
It is the most normal measuring mode, when you start measurement, meter will measure, calculate
and display measuring result continuously. Please refer to following display chart. During
measurement, user could view measuring parameter, calibrate electrode, store or print measuring
result. When measurement finishes, you can press 'X' (quit) exit the measuring mode and return to
start mode.
4.4.1.3.2 Timed Reading Measuring Mode
It is particularly set for easy use. For example, if you need to measure conductive data
continuously in 30 minutes, you can select 'Timed Reading' measuring mode. When measurement
starts meter will automatically measure, calculate and display measuring result till the set time up
and then to save the measuring data automatically (if it is connected with serial printer, meter will
print automatically) and start next measurement.
Press 'X'(quit) and 'Enter' key to exit from 'Timed Reading' measuring mode.
If user selects 'Timed Reading' measuring mode and needs to set interval, the default interval is
10 minutes which displayed as follows:
Display chart of continuous measuring
mode
Display chart of 'Timed Reading' measuring
mode
63