Descargar Imprimir esta página

GAS GAS PAMPERA Manual Del Usuario página 31

Publicidad

Functions
Work mode. This can be activated (ON) and deactivated (OFF).
Clock. Indicates hour and minutes.
ET-
Chronometer. Indicates the time passed since the last activation of the work mode.
TD
Partial distance. Indicates the distance covered since the last activation of the work mode.
MAX-
Maximum speed obtained since the last activation of the work mode.
AVE
Average speed during the last activation of the work mode.
TOD
Total distance covered since the equipment was turned on.
Km/H.
Instantaneous speed.
Note: In order to select any of the functions, the motor must remain stopped for ten seconds. A minute after selecting
a function, the screen will turn off automatically. It is activated again by pressing the MODE key or putting on the
motor.
Work mode.
This option is selected by means of the MODE key. By pressing START it goes from the deactivated state (OFF) to the
activated stated (ON) and viceversa.
When it is in the activated mode, the symbol
begins and the calculations are carried out to obtain the information which is visualised in the function Chronometer,
partial Distance, maximum Speed and average Speed.
When OFF is pressed, the adquisition of data and the calculations are detained, but the calculated values are not lost,
and can be visualised by selecting the corresponding function.
By activating once more the work mode (ON), the values previously stored are wiped out.
Chronometer.
The chronometer visualises the time passed since the last activation of the work mode. Initially, minutes and seconds
are visualised. After an hour has passed, hours and minutes are visualised.
Maximum speed.
This shows the maximum speed reached during the activated work mode.
Average speed.
This shows the average speed reached during the activated work mode.
Total distance.
This visualises the total distance covered since the moment when the equipment was turned on for the first time.
The value accumulated is maintained permanently, even without batteries, and is independent of the condition of the
work mode.
is visualised permanently on the screen. The gathering of data then
GAS-GAS PAMPERA
36

Publicidad

loading