Screw Tightening Calibration - Interpump Group KT-WK Serie Manual De Reparación

3

SCREW TIGHTENING CALIBRATION

Screw tightening must only be performed with a torque
wrench.
Description
Cover fixing screws
Oil drain plug
Piston fixing screws
Con-rod cap fixing screws
Valve cover fixing screws
Head fixing screws
"A" type flange fixing screws
SAE C drawbar coupling
fixing screws
2nd PTO flange fixing screws
* The con-rod cap fixing screws must be tightened
simultaneously, respecting the phases indicated on
page 17.
** The head fixing screws exploded view pos. 47 must be
tightened with a torque wrench respecting the order
shown in the diagram in (Fig. 34).
*** The valve cover fixing screws exploded view pos. 45
must be tightened with a torque wrench respecting
the order shown in the diagram in (Fig. 34).
**** To secure the 2nd PTO flange, use Loctite 243 Blue
Code 12006400.
Exploded Tightening
view position torque Nm
9 10
11 40
27 20
18 30*
45 180***
47 80**
86 22
88 40
96 145****
Fig. 34
24