Programmed Heating - Panasonic NE-1880 Manual De Instrucciones

B. PROGRAMMED HEATING
X In Program Unlock Mode:
MAKE SURE THE UNIT IS PROPERLY PROGRAMMED (see page 21).
Example: To select Memory pad "5" at A side in which your desired heating program (at HIGH power
for 3 min., single stage heating) is set
PAD
1
Open the door and put the food in the oven.
The oven lamp will turn on and "0" will appear.
Note: While "0" appears, operation is available. One minute after the
2
Press the Desired Memory Pad "5".
The currently programmed information will be indicated.
5
3
Press Start pad.
The oven lamp will turn on and heating will start. The heating time
will count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. "0" will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window
will go blank.
Note:
• When you want to select Memory Area B, press Memory Shift pad i before pressing the desired Memory
pad.
X In Program Lock Mode:
Just press the desired Memory pad. Heating will automatically start without pressing Start pad.
How to Operate NE-1880
INSTRUCTION
door is closed, "0" will disappear.
- 20 -
DIGITAL DISPLAY WINDOW
PROG
A
1
PROG
A
1