Harbor Breeze HKC-103 Manual Del Usuario página 16

TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
There is
excessive
wobbling
1. The blades and/or blade are
loose.
2. The blades are unbalanced.
3. The fan mounting is not
secure.
4. The fan is too close to the
vaulted ceiling.
5. The set screw on the motor
housing yoke is loose.
CORRECTIVE ACTION
1. Check and tighten all screws that hold
the fan blades to the blade arms and the
blade arms to the motor.
2. Switch one blade with a blade from the
opposite side. Or balance the fan using
a balancing kit (not supplied).
3. Turn off the power. Loosen the canopy
and verify that the mounting bracket is
secure to the electrical outlet box. The
bracket must be flush without movement
against the outlet box.
4. Use a longer downrod or move the fan
to another location.
5. Lift up the yoke cover and tighten the set
screw to the yoke until secure.
16
Lowes.com/harborbreeze