Final Installation - Harbor Breeze HKC-103 Manual Del Usuario

FINAL INSTALLATION

1. Tuck the connections neatly into the ceiling outlet
box. Remove one mounting bracket screw (DD) from
the mounting bracket (E) and loosen the other screw
around 1/4 in. Align the canopy (B) up to the ceiling
and over the loose mounting bracket screw (DD).
Place the canopy (B) into the key hole and rotate
clockwise. Secure the canopy (B) with the previously
removed screw (DD). Place the canopy cover (C)
over the canopy (B) and rotate clockwise until it is
locked into position.
Haodwaoe Used
DD
Mounting Bracket Screw
2. Align the two holes of a blade assembly (G) over two
holes on the motor assembly (F). Insert two motor
screws (AA) through the holes in the blade assembly
(G) and tighten the motor screws (AA) securely.
Repeat this step with the remaining blade assemblies
(G), making sure to completely secure each blade
arm before proceeding with the next.
Haodwaoe Used
AA
Motor Screw
OPTIONAL LIGHT KIT INSTALLATION
1. Remove the three fitter plate screws (EE) from the
underside of the motor assembly (F) and lower the
switch housing cap (I).
Haodwaoe Used
EE Fitter Plate Screw
1
DD
x 2
2
x 6
1
EE
x 3
12
AA
G
F
Lowes.com/harborbreeze
B
C
F
I