Structure; Key Switch; Light Repeaters - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Instalación

4 Product Description
During commissioning of the Fuel Save Controller, the user has the possibility to activate various functions for stable
and reliable operation such as minimum genset loading and power control range. In addition, it is possible to remotely
monitor all relevant measurement data, process data and the current system status by means of SCADA or a web-
based interface.
4.2

Structure

Figure 3: Fuel Save Controller
Position
A
B
C
4.3

Key Switch

Position
Start
Stop
4.4

Light Repeaters

The Operation und Warning light repeaters indicate the current status of the Fuel Save Controller.
12 FSC20-IA-xx-20
A
F U E L
S A V E
C O N
T R O L
Designation
Key switch
Operation light repeater
Warning light repeater
Description
The Fuel Save Controller can be started via the Start position.
Before the Fuel Save Controller can be stopped, ensure that the the current reserve
power of the gensets is sufficient for supplying the power required by the loads. An
overload of the gensets can lead to the destruction of the gensets (see Fuel Save Con-
troller manual).
The Fuel Save Controller can be stopped Stopposition.
B
C
L E R
SMA Solar Technology AG
Installation Manual