Nemox gelato CHEF 2200 i-Green Instrucciones Para El Uso página 6

HOW TO CONNECT THE CORD TO A U.K. PLUG: IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
•Green and yellow: Earth
•Blue:
•Brown:
Please, read the instructions given below before connecting the cord to a plug. If
in doubt, please, consult a qualified electrician. As the colours of the wires in the
mains lead of this appliance may not correspond with the coloured markings
identifyng the terminals in your plug, proceed as follows: the wire that is coloured
Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or the Earth symbol (G), or coloured Green or Green and Yellow.
The wire that is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red. The wire that is coloured Blue must be
connected to the terminal which is marked with the letter N or coloured Black.
SAFETY POINTS FOR REWIRABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS1363 13A plug.
•If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is a moulded on plug), the
flexible cord insulation should be stripped back as appropriate and a suitable 3 pin plug fitted.
•WARNING: Dispose of a plug that has been cut from the power supply cord, as such a plug is hazardous if inserted in
a live 13A socket outlet elsewhere in the house.
•Should the fuse need to be replaced an ASTA marked fuse, approved to BS 1362, of the same rating must be used.
•Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the cover is omitted or lost until a
replacement is obtained. Make certain that only the correct fuse cover is used and fitted.
•For plugs with detachable fuse cover, the replacement must be the same as the colour insert in the base of the plug, or
as directed by the embossed wording on the base of the plug.
•If the detachable fuse cover is lost a replacement may be purchased from a Service Centre.
•Information for supply may also be obtained from the plug manufacturer.
"GELATO CHEF 2200-OXIRIA"
"GELATO CHEF 2200 / OXIRIA" is sold complete with all
the accessories for use with fixed or removable bowl. In
the original packaging, the removable bowl is stored
inside the fixed bowl.
IMPORTANT ABOUT THE USE
•Hygiene is the most important aspect of ice cream
making. Make sure that all the parts, in particular those
coming in direct contact with the ice cream, are
scrupulously clean.
•Never turn off the freezing switch (B) when the
machine is working. In case you accidentally switch it
off or the power fails, wait at least 10 minutes before
turning it on again. The compressor is fitted with a
safety device to prevent any possible damage to the
motor unit. Should you restar t the machine
immediately after it has been switched off, the
compressor will not freeze.
•Variations in speed and noise during ice-cream making
are also to be expected and in no way affect the unit's
normal functioning.
•Keep the appliance far enough from walls and
furniture, which might restrict air circulation,
necessary for cooling the unit. It is normal for warm or
hot air to flow from the lateral air vents. The
refrigeration process requires this.
6
Neutral
Live
English
UK USERS ONLY
PREPARING ICE CREAM
1). Carefully clean all parts in direct contact with
ingredients. Warning: make sure that the unit is
unplugged before starting cleaning.
2). Fit the mixing paddle (C) to the motor unit (H+G).
3). Lock the motor unit into position in line with the
locking ring (F). The raised area on the bottom of
the paddle will need to be in line with the cleft on the
bottom of the fixed bowl.
4). Connect the cord for the paddle motor (I) to the
socket on the machine body. Warning: do not
connect the cord into the mains supply as you
may damage the machine!
5). Press (B) tg switch the freezer on. Allow to run for
for 5 minutes before use.
6). Press (E) switch to start the mixing paddle.
Warning: ensure the paddle motor is fully locked
to the ring (F), otherwise it will not be possible to
switch the motor on.
7). Pour the mixture into the bowl. For best results, it is
recommended that you pre-mix the ingredients in a
separate bowl to obtain a smooth, lump-free
mixture. Always use ingredients at fridge
temperature to reduce temperature differences and
cut down preparation time.