Bowa ErgoLAP Manual Del Usuario página 33

3.5.1. Inspecting parts
MN030-667-S2 EN
A Jaw
 Check straigtness.
 Check the distal and proximal
insulation visually for possible damage
(fractures, breaks).
B Inner shaft tube
 Check straigtness.
C Outer shaft tube
 Check straigtness.
D Handle
D1 Push button (red)
D3 Sealing (black)
 Install D1 and D3.
 Check:
•
Does D1 operate smoothly?
 Discard or replace defective devices.
E HF cable
 Check insulation visually. Dispose of
HF cables with worn or faulty
insulation.
13