Safety Precautions; System Components - STEINEL PROFESSIONAL IR Quattro KNX Manual De Instrucciones

Operating Instructions
GB
Dear Customer,
Congratulations on purchas-
ing your new STEINEL pres-
ence detector and thank you
for the confidence you have
shown in us. You have chosen
a high-quality product that has
been manufactured, tested
and packed with the greatest
care.

Safety Precautions

í The presence detector
must only be installed by a
qualified electrician in ac-
cordance with national
wiring regulations as de-
fined in VDE 08 29
(DIN EN 5000 90).
í Installed improperly, low-
voltage products can
cause extremely serious

System Components

Sensor module
Metal frame
Sensor base
k
4. Kaiser stud-wall junction
1
box, optional
k
4. clamping-type ceiling
2
adapter UP Box
Installation / Wiring
The sensor is only suitable
for recessed ceiling installa-
tion indoors. A clamping-type
ceiling adapter or surface-
mounting adapter is not
included.
Please familiarise yourself with
these instructions before at-
tempting to install the pres-
ence detector because pro-
longed, reliable and trouble-
free operation will only be en-
sured if it is fitted and used
properly.
personal injury or damage
to property.
í This product must never be
connected to a 230 V AC
power supply as it is in-
tended for connection to
an extra-low voltage power
supply.
Surface-mounting adapter
Catch mechanism
Reach setting
Programming button
Installation and wiring
- 14 -
We hope your new STEINEL
sensor will bring you lasting
pleasure.
Shrouds for minimising
the detection zone
(HF 360 KNX).