Important Notices
CE Declaration
CE Declaration
Hereby, X-Rite, Incorporated, declares that this device is in compliance with the essential
Manufacturer's Name: X-Rite, Incorporated
requirements and other relevant provisions of Directive(s) EMC 2014/30/EU, LVD 2014/35/EC,
and RoHS 2011/65/EU.
Authorized Representative: X-Rite, Incorporated
Siemensstraße 12b • 63263 Neu-Isenburg • Germany
Phone:+49 (0) 61 02-79 57-0 • Fax: +49 (0) 61 02 -79 57-57
FEDERAL COMMUNICATIONS COMMISSION NOTICE
Model Name: i1Pro
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Directive(s) Conformance: EMC 2004/108/EC LVD 2006/95/EC
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
FEDERAL COMMUNICATIONS COMMISSION NOTICE
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
encouraged to try to correct the interference by one or more of the following measures:
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
• Reorient or relocate the receiving antenna.
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
• Increase the separation between the equipment and receiver.
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
• Consult the dealer or an experienced radio/TV technician for help.
to correct the interference by one or more of the following measures:
INDUSTRY CANADA COMPLIANCE STATEMENT
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
This Class B digital apparatus complies with Canadian ICES-003.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
• Consult the dealer or an experienced radio/TV technician for help.
• Modifications not expressly approved by the manufacturer could void the user's authority to operate
NOTE: USB interface cable shipped with this device must be used in order to maintain compliance with the desired
the equipment under FCC rules.
CE mark requirements, FCC Part 15 Rules, and Canadian ICES-003.
INDUSTRY CANADA COMPLIANCE STATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE: USB interface cable ( 2.0 m) shipped with this device must be used in order to maintain compliance with
the desired CE mark requirements, FCC Part 15 Rules, and Canadian ICES-003.
Safety Information
Safety Information
EQUIPMENT INFORMATION
Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise
design integrity and become unsafe.
WARNING: This instrument is not for use in explosive environments.
ADVERTENCIA – NO use este aparato en los ambientes explosivos.
AVVERTIMENTO – NON usare questo apparecchio in ambienti esplosivi.
WARNUNG: Das Gerät darf in einer explosiven Umgebung NICHT verwendet werden.
AVERTISSEMENT:
Cet instrument ne doit pas être utilisé dans un environnement explosif.
If this product is used in a manner not specified by the instruction, the safety protection provided by the device
may be impaired or become inoperable.
EN
3