Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 79

Specification

Spectral
engine:
Spectral range:
Physical sampling interval:
Optical resolution:
Spectral reporting:
Measurement frequency in scanning
mode:
Optics:
Measurement geometry:
Measurement aperture:
Illumination spot size:
Light source:
Reflectance
measurement:
Measurement conditions:
OBC:
Calibration:
38
i1Pro 3 PLUS: i1
technology (holographic diffraction grating with 128 pixel
®
diode array) with built-in wavelengths check
380 - 730 nm
3.5 nm
10 nm
380 nm ... 730 nm in 10 nm steps
400 measurements per second
45º/0º ring illumination optics, ISO 13655:2017
8 mm (0.31") diameter
(effective measurement aperture during scanning is depending on the
patch size and measurement speed)
12 mm (0.47")
i1Pro 3 LED Illumination (including UV)
spectral reflectance [dimensionless]
M0: UV included - ISO 13655:2017 M1: D50 - ISO 13655:2017
M2: ISO 13655:2017 M3: Polarization - ISO 13655:2017
Optical Brightener Compensation (OBC) with i1Profiler software
Manual on external ceramic white reference
Measurement background:
white, ISO 13655:2017; for measurements on backup board
Minimal patch size in spot mode
14 x 14 mm (0.55" x 0.55")
(Width x Height):
Minimal patch size in scanning mode
16 x 16 mm (0.63" x 0.63") with i1iO
(Width x Height):
16 x 16 mm (0.63" x 0.63") with sensor ruler
20 x 16 mm (0.79" x 0.63") without sensor ruler
20 x 16 mm (0.79" x 0.63") with sensor ruler in M3 Mode
22 x 16 mm (0.87" x 0.63") without sensor ruler in M3 Mode
Maximum scan length:
515 mm (20.28")
Inter-Instrument-Agreement:
0.4 ∆E00* average, 1.0 ∆E00* max.
(deviation from X-Rite manufacturing standard at a temperature of 23ºC
(73.4ºF) on 12 BCRA tiles (D50, 2º))
Short-term repeatability:
0.1 ∆E94* on white (D50,2°, mean of 10 measurements every 3 s on
white)
Emission
measurement:
spectral radiance [mW/nm/m
Measurement range:
0.2 - 5000 cd/m
Short-term repeatability:
x,y ±0.002 typ. (5000 K, 80 cd/m
Ambient light
i1Pro 3 PLUS:
spectral irradiance [mW/nm/m
measurement:
cosine corrected diffusor light measurement head
Interface:
USB 1.1
EN
2
2
/sr], luminance [cd/m
]
2
on a typical LCD-Monitor
2
)
2
], illuminance [lux]
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pantone i1 pro 3

Tabla de contenido